EMI ElectroMagnetic Interference - vertaling naar Engels
Diclib.com
Woordenboek ChatGPT
Voer een woord of zin in in een taal naar keuze 👆
Taal:

Vertaling en analyse van woorden door kunstmatige intelligentie ChatGPT

Op deze pagina kunt u een gedetailleerde analyse krijgen van een woord of zin, geproduceerd met behulp van de beste kunstmatige intelligentietechnologie tot nu toe:

  • hoe het woord wordt gebruikt
  • gebruiksfrequentie
  • het wordt vaker gebruikt in mondelinge of schriftelijke toespraken
  • opties voor woordvertaling
  • Gebruiksvoorbeelden (meerdere zinnen met vertaling)
  • etymologie

EMI ElectroMagnetic Interference - vertaling naar Engels

DISTURBANCE IN AN ELECTRICAL CIRCUIT DUE TO EXTERNAL SOURCES OF RADIO WAVES
Radio Frequency Interference; Electromagnetic noise; Radio frequency interference; Radio interference; RF interference; Electromagnetic Interference; Dirty power; Distortion (electronic circuits); Electrical interference; Electromagnetic influence; EM interference; Conducted electromagnetic interference; Intentional EMI; Conducted Electromagnetic Interference; Radio-frequency interference; Electro-magnetic interference; Radiofrequency interference; Harmful interference; Radio Frecuency Interference; Radio-frequency-interference
  • Interference by 5 GHz Wi-Fi seen on Doppler weather radar
  • Electromagnetic interference in analog TV signal
  • Recording of US House of Representatives debate on October 8, 2002, interrupted and distorted by electromagnetic interference from a [[solar flare]] at approximately 4:30p.m.

EMI ElectroMagnetic Interference      
EMI ElectroMagnetic Interference noun радиопомехи
electrical interference         

общая лексика

электрическая помеха

электрическое влияние

electromagnetic interference         

общая лексика

электромагнитные помехи (наводки)

помехи в сети электропитания и в электронных цепях от работы электрических машин и электронных устройств. Могут быть снижены за счет экранирования

синоним

EMI

Definitie

Radio Frequency Interference
<hardware, testing> (RFI) Electromagnetic radiation which is emitted by electrical circuits carrying rapidly changing signals, as a by-product of their normal operation, and which causes unwanted signals (interference or noise) to be induced in other circuits. The most important means of reducing RFI are: use of bypass or "decoupling" capacitors on each active device (connected across the power supply, as close to the device as possible), risetime control of high speed signals using series resistors and VCC filtering. Shielding is usually a last resort after other techniques have failed because of the added expense of RF gaskets and the like. The efficiency of the radiation is dependant on the height above the ground or power plane (at RF one is as good as the other) and the length of the conductor in relationship to the wavelength of the signal component (fundamental, harmonic or transient (overshoot, undershoot or ringing)). At lower frequencies, such as 133 MHz, radiation is almost exclusively via I/O cables; RF noise gets onto the power planes and is coupled to the line drivers via the VCC and ground pins. The Rf is then coupled to the cable through the line driver as common node noise. Since the noise is common mode, shielding has very little effect, even with differential pairs. The RF energy is capacitively coupled from the signal pair to the shield and the shield itself does the radiating. At higher frequencies, usually above 500 Mhz, traces get electrically longer and higher above the plane. Two techniques are used at these frequencies: wave shaping with series resistors and embedding the traces between the two planes. If all these measures still leave too much RFI, sheilding such as RF gaskets and copper tape can be used. Most digital equipment is designed with metal, or coated plastic, cases. Switching power supplies can be a source of RFI, but have become less of a problem as design techniques have improved. Most countries have legal requirements that electronic and electrical hardware must still work correctly when subjected to certain amounts of RFI, and should not emit RFI which could interfere with other equipment (such as radios). See also Electrostatic Discharge, {Electromagnetic Compatibility}. (1998-01-26)

Wikipedia

Electromagnetic interference

Electromagnetic interference (EMI), also called radio-frequency interference (RFI) when in the radio frequency spectrum, is a disturbance generated by an external source that affects an electrical circuit by electromagnetic induction, electrostatic coupling, or conduction. The disturbance may degrade the performance of the circuit or even stop it from functioning. In the case of a data path, these effects can range from an increase in error rate to a total loss of the data. Both man-made and natural sources generate changing electrical currents and voltages that can cause EMI: ignition systems, cellular network of mobile phones, lightning, solar flares, and auroras (northern/southern lights). EMI frequently affects AM radios. It can also affect mobile phones, FM radios, and televisions, as well as observations for radio astronomy and atmospheric science.

EMI can be used intentionally for radio jamming, as in electronic warfare.

Vertaling van &#39EMI ElectroMagnetic Interference&#39 naar Russisch